Pianos regularly make movers annual list of products that are most often harmed. Grand pianos are particularly problematic. Practicing the following treatments for taking apart, padding and packing grand pianos will prevent damage, lower claims expenditure, and improve client fulfillment.
1) At least 3 people are required to handle an infant grand piano. If the infant grand piano needs to increase or down stairs or if a complete or show grand piano requires to be transported, a minimum of 4 individuals are needed.
2) Constantly complete a comprehensive and precise inventory. It may be more effective or essential to use a visual inventory to effectively explain and show pre-existing damage.
3) As various parts are taken apart, please location all hardware in an effectively labeled parts bag and then place the parts bag in a "Parts Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furnishings pad.
5) Detach the cover by eliminating the hinge pins. Have someone wiggle the cover, holding it opposite the hinge, while a second person works the pin loose. Please take care not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small cloth to assist avoid damage to the wood if needed. Wrap the lid in a tidy furnishings pad.
6) Get rid of the prop that holds the cover open and wrap it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Get rid of the pedal assembly and cover it in a clean furnishings pad. The braces at the rear of the assembly rest in slots at each end. When removing the screws, please beware not to drop the braces. In addition, please be particularly careful with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the proper number on each rod. Note: If masking tape is unavailable, please use correctly identified parts bags for this function. When reassembling at destination, please be sure to put the rods in the proper order so that the pedals will work effectively.
8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you handle the piano. Cover the top of the piano with two tidy furnishings pads, nicely folded around the keyboard. Use rubber bands to protect the pads. Note: Please ensure that the surface of the piano is dust-free before padding it. Padding a highly refined surface area that is dusty may cause fine scratches, particularly on a black lacquer surface.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board need to be at the keyboard end of the piano.
10) Eliminate the left front leg by placing one person below the piano at the left end of the keyboard. Be sure to have two individuals raising the corner of the piano while the third person removes the leg. Note: Please be sure to keep in mind which legs were removed from which positions considering that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by reducing the "leg-less" end onto the board. Please make certain to lift the whole piano slightly while completing this maneuver to prevent unnecessary pressure on the staying, connected legs as the piano tips. Lift the piano to an upright position on the board. Note: Please make sure that the soundboard is protected before lifting. Make sure that the piano is focused comfortably versus the brace at the end of the piano board. Keep in mind: Never ever leave the piano unattended. Always have at least one person holding the piano consistent at all times.
12) Remove the 2 staying legs and wrap them in clean furnishings pads. These legs are held in place by a "essential and slot" arrangement. To remove the leg, slide it inward towards the center of the piano till it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furniture pads however under the straps to offer additional defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for protection versus home damage, place the keyboard end of the piano towards the bottom of the stairs. Attach a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano Read More Here board and place it in a tier as the very first base item with the keyboard dealing with the wall of the preceding tier. The best location to load the padded cover is between the piano and the preceding tier or between the wall and the piano.
Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing typical sense and practicing the procedures listed above.